The HPA-DAC4 accessory card is designed to work in conjunction with HPA Series 4-channel amplifiers. The HPA-DAC4 is a 4-input Dante receiver that features digital audio transportation over standard IP networks. The HPA Series 4-channel amplifiers come standard with four balanced line inputs and an accessory card slot to add an additional 4-inputs, giving the amplifier a total of 8-inputs.
Analog Input 1 and Dante Input 1 are isolated from each other and are electronically summed together forming a mixed output. Both Input levels to the amplifier channel are controlled by the Ch-1 level control. Channel 2, 3, and 4 inputs are configured the same as Channel 1.
FEATURES
- Dante® Network Audio Enabled
- 4-Channel Receiver
- Integrates with 4-Channel HPA Series Amplifiers
SPECIFICATIONS
Connector Type - RJ-45
Gain Controls - 0dBFS = 20dBu & 0dBFS = 10dBu PCB shunt selectable
Frequency Response - 20Hz - 20KHz +/- 1dB
THD - .06% @ 1kHz
Maximum Output Level - 7dBu
Height - 0.97" (2.46cm)
Width - 2.7" (6.8cm)
Depth - 2.5" (6.3cm)
Weight - 2.6oz (0.07kg)
