ACI 104214 8511A240 TIMER MULTI,24-240V,0-10M,DPDT
85 Series Multi Function / Range / Voltage Timers
| ||||
 | ||||
OUTPUT | TIMING RANGE | SWITCH "T" (TIME RANGE) SETTING | MODEL NUMBER | CATALOG NUMBER | WT Lbs (each) | ||||
00 | 10 | 01 | 11 | ||||||
11 PIN DPDT | SEC(s) - MIN (m) | 0.05(s) - 1(s) | 0.12(s) - 10(s) | 0.6(s) - 1(m) | 6(s) - 10(m) | 8511A240 | 104214 | 0.3 |  |
MIN (m) - HOUR (h) | 0.05(m) - 1(m) | 0.12(m) - 10(m) | 0.6(m) - 1(h) | 1(m) - 10(h) | 8521A240 | 104216 | 0.3 | | |
8 PIN SPDT | SEC (s) - MIN (m) | 0.05(s) - 1(s) | 0.12(s) - 10(s) | 0.6(s) - 1(m) | 6(s) - 10(m) | 8542A240 | 104217 | 0.3 | |
MIN (m) - HOUR (h) | 0.05(m) - 1(m) | 0.12(m) - 10(m) | 0.6(m) - 1(h) | 1(m) - 10(h) | 8552A240 | 104218 | 0.3 | | |
| PANEL MOUNT ADAPTOR for snap mounting into a panel cutout. | 115880 | 0.1 | | ||||||
FUNCTION | SWITCH "F" SETTING | DESCRIPTION |
ON DELAY | 0 0 | On Delay: Timing begins when power is applied. The output contacts transfer when the "On Delay" time delay setting is reached. To reset the timer, remove the input power or operate the customer supplied external "reset" switch. |
REPEAT CYCLE | 1 0 | Repeat Cycle: Timing begins when power is applied. The output contacts transfer when the time delay setting is reached. The output contacts remain transferred until the time delay setting is again reached. The output contacts are then released and return to the original state. The timer automatically resets and repeats the timing cycle until the input power is removed. |
OFF DELAY | 0 1 | Off Delay: Timing requires a customer supplied normally closed external switch connected to the "reset" terminals. Applying power immediately transfers the output contacts. Timing begins when the "reset" switch is opened. When the time delay setting is reached, the output contacts are released. Reset the timer by operating the customer supplied external "reset" switch. |
INTERVAL(REVERSE ON DELAY) | 0 1 | Interval: Applying power immediately transfers the output contacts and timing begins. Once the time delay setting is reached, the output contacts are released. Reset the timer either by removing the input power or operating the customer supplied external "reset" switch. |
| Reset Switch: | | Customer supplied. Normally closed switch required for "Off Delay" function. "On Delay", "Repeat Cycle" and "Interval" Timing resets the timer to zero. |
| Memory Switch: | Customer supplied. Pauses the timing cycle at that point in the cycle. When it is released it allows the cycle to resume from the same point. |
