SolaHD HS1B250 0.250KVA 240X480-120/240

Automation Transformers
Non-ventilated 50 VA to 45 kVA

.05-.250 kVA(Single Phase Only)

• UL-3R enclosure for indoor or outdoor service
• Low temperature rise, UL Class 130^°C or 80^°C insulation system, 80^°C temperature rise under full load
• Conduit knockouts for side entry into roomy wiring compartment
• Copper lead wire terminations
• Class 1, Division 2

0.50-25 kVA(Single Phase)
3-45 kVA(Three Phase)

• UL-3R non encapsulated enclosure\s for indoor and outdoor service
• Electrostatically shielded for quality power on sizes 1 kVA and larger
• UL Class 180^°C or 200^°C insulation system, 115^°C temperature rise under full load
• Conduit knockouts for side entry into wiring compartment
• Copper lead wire terminations
• .500-10 KVA units are encapsulated with electrical grade silica sand and epoxy for industrial applications
  
  

  Single Phase, Encapsulated

  
  

  Group 1: 240 x 480 Volt Primary, 120/240 Secondary, 60 Hz

  KVA	Catalog Number Group I Rolled Steel	Catalog Number Group II Stainless Steel	Height (inch)	Width (inch)	Depth (inch)	Ship Weight Approx. (lbs)	Design Style	Elec Conn	Primary Amps	Secondary Amps
  .050	HS1B50		6	4	3	3	2	12	.208/.104	.416/.208
  .075	HS1B75		6	4	3	3	2	12	.312/.156	.625/.312
  .100	HS1B100		6	4	3	4	2	12	.417/.208	.833/.417
  .150	HS1B150		8	4	4	5	2	12	.625/.313	1.25/.625
  .250	HS1B250		8	4	4	8	2	12	1.04/.512	2.08/1.04
  Encapsulated
  .5	HS1F500B	HSS1F500B	10	6	5	22	3	12	2.08/1.04	4.16/2.08
  .75	HS1F750B	HSS1F750B	10	6	5	27	3	12	3.13/1.56	6.25/3.13
  1	HS1F1BS	HSS1F1BS	10	6	5	28	3	13	4.17/2.08	8.33/4.17
  1.5	HS1F1.5AS	HSS1F1.5AS	12	10	7	38	4	13	6.25/3.13	12.5/6.25
  2	HS1F2AS	HSS1F2AS	12	10	7	45	4	13	8.33/4.17	16.7/8.33
  3	HS5F3AS	HSS5F3AS	12	10	7	55	4	14	12.5/6.25	25.0/12.5
  5	HS5F5AS	HSS5F5AS	17	14	9	131	4	14	20.8/10.4	41.6/20.8
  7.5	HS5F7.5AS	HSS5F7.5AS	17	14	9	156	4	15	31.3/15.6	62.5/31.3
  10	HS5F10AS	HSS5F10AS	17	14	9	156	4	15	41.7/20.8	83.3./41.7
  15*	HS5F15AS	HSS5F15AS	30	29	12	549	4	15	62.5/31.2	125.0/62.5
  25*	HS5F25AS	HSS5F25AS	30	29	12	637	4	15	104.0/52.0	208.0/104.0

  cUL Underwriters tested to CSA standards.
  

  Group 2 : 600 Volt Primary, 120/240 Secondary, 60 Hz

  KVA	Catalog Number Group I Rolled Steel	Catalog Number Group II Stainless Steel	Height (inch)	Width (inch)	Depth (inch)	Ship Weight Approx. (lbs)	Design Style	Elec Conn	Primary Amps	Secondary Amps
  .100	HS10B100		6	4	3	4	2	18	0.167	.833/.417
  .150	HS10B150		8	4	4	5	2	18	0.25	1.25/.625
  .250	HS10B250		8	4	4	8	2	18	0.417	2.08/1.04
  Encapsulated
  .5	HS10F500B	HSS10F500B	10	6	5	22	3	18	0.833	4.16/2.08
  .75	HS10F750B	HSS10F750B	10	6	5	23	3	18	1.25	6.25/3.13
  1	HS10F1BS	HSS10F1BS	10	6	5	28	3	18	1.67	8.33/4.17
  1.5	HS10F1.5AS	HSS10F1.5AS	12	10	7	38	4	18	2.5	12.5/6.25
  2	HS10F2AS	HSS10F2AS	12	10	7	60	4	18	3.33	16.7/8.33
  3	HS10F3AS	HSS10F3AS	12	10	7	66	4	19	5.0	25.0/12.5
  5	HS10F5AS	HSS10F5AS	17	14	9	100	4	19	8.3	41.6/20.8
  7.5	HS10F7.5AS	HSS10F7.5AS	17	14	9	135	4	19	12.5	62.5/31.3
  10	HS10F10AS	HSS10F10AS	17	14	9	150	4	19	16.7	83.3./41.7

  Group 3 : 120/208/240/277 Volt Primary, 120/240 Secondary, 60 Hz

  KVA	Catalog Number Group I Rolled Steel	Catalog Number Group II Stainless Steel	Height (inch)	Width (inch)	Depth (inch)	Ship Weight Approx. (lbs)	Design Style	Elec Conn	Primary Amps*	Secondary Amps
  Encapsulated
  E77014 UL File applies to the following catalog numbers.
  1	HS12F1BS	HSS12F1BS	10	6	5	29	3	16	3.6	8.33/4.17
  1.5	HS12F1.5AS	HSS12F1.5AS	12	10	7	40	4	17	5.4	12.5/6.25
  2	HS12F2AS	HSS12F2AS	12	10	7	60	4	17	7.2	16.7/8.33
  3	HS12F3AS	HSS12F3AS	12	10	7	66	4	17	10.8	25.0/12.5
  5	HS12F5AS	HSS12F5AS	17	14	9	104	4	17	18.0	41.6/20.8
  7.5	HS12F7.5AS	HSS12F7.5AS	17	14	9	135	4	17	27.1	62.5/31.3
  10	HS12F10AS	HSS12F10AS	17	14	9	156	4	17	36.1	83.3/41.7
  * Amperage calculated at 277 Volts on primary.

  
  

  
  

  Group 4: Export 190/200/208/220/380/400/415/440 Volt Primary, 110/220 Secondary, 50/60 Hz, Copper wound Export 200/208/230/400/415/460 Volt Primary, 115/230 Secondary, 50/60 Hz Copper wound Export 208/240/415/480 Volt Primary, 120/240 Secondary, 60 Hz only Copper wound

  E77014 UL File applies to the following catalog numbers.

  1.5

  KVA	Catalog Number Group I Rolled Steel	Catalog Number Group II Stainless Steel	Height (inch)	Width (inch)	Depth (inch)	Ship Weight Approx. (lbs)	Design Style	Elec Conn	Primary Amps*	Secondary Amps
  Encapsulated, Copper Wound
  1	HS14F1BS	HSS14F1BS	10	6	5	34	3	20	4.5/2.3	9.1/4.5
  HS14F1.5BS	HSS14F1.5BS	12	10	7	40	4	21	6.8/3.4	13.6/6.8
  2	HS14F2BS	HSS14F2BS	12	10	7	60	4	21	9.1/4.5	18.2/9.1
  3	HS14F3BS	HSS14F3BS	12	10	7	73	4	21	13.6/6.8	27.3/13.6
  5	HS14F5BS	HSS14F5BS	17	14	9	100	4	21	22.7/11.4	45.5/22.7
  7.5	HS14F7.5BS	HSS14F7.5BS	17	14	9	140	4	21	34.1/17.0	68.2/34.1
  10	HS14F10BS	HSS14F10BS	17	14	9	175	4	21	45.5/22.7	90.9/45.5
  * Amperage calculated at 220/440 Volts on primary. UL Listed, CSA Certified and CE marked. 240 & 480 V not available at 50 Hz.