The
FLIR VP50-2 is a durable, CAT IV-rated non-contact voltage detector featuring light, vibration, and beeper feedback alarms and a powerful LED flashlight. Use the VP50-2 to reliably check if an AC circuit is live before beginning work; detect voltage on exposed conducting parts or through insulation; identify live wires within electrical panels, switches, and outlets; or trace live wires and map circuits. With an ergonomic and drop-tested design, the FLIR VP50-2 is the right choice for professionals performing field troubleshooting and verification of electrical installations within residential, commercial, and industrial buildings.
- Alarm Notification - Sound, Flashing LED, Vibration
- Flashlight - Yes
- Tip Light - Yes
- Drop test - 3 m (9.8 ft)
- Category Rating - CAT IV-1000 V
- Certifications - cULus
- Warranty - Limited 3-year
MEASUREMENT & ANALYSIS
- AC Voltage Range - 90 to 1000 V AC (default, solid green light)
- Category Rating - CAT IV-1000 V
- Frequency Range - 45 to 65 Hz
- High Sensitivity Mode - 24 to 1000 V AC (solid amber light)
- Vibrating Indication - Yes
ENVIRONMENTAL & CERTIFICATIONS
- Ambient temperature range for operation -10 to 50°C (14 to 122°F)
- Certifications - cULus
- Drop test - 3 m (9.8 ft)
- Storage Temperature -20 to 60°C (-4 to 140°F)
- Warranty - Limited 3-year
GENERAL
- Alarm Notification - Sound, Flashing LED, Vibration
- Dimensions (L x W x H) - 158.5 x 26 × 29 mm (6.24 x 1.02 x 1.14 in)
- Flashlight - Yes
- Tip Light - Yes
- Weight - 59 g (2.1 oz) including batteries
POWER
- Battery Life ~5 hours continuous (flashlight off)
- Power Requirements - 2 × AAA alkaline batteries
