FLIR TA72 Universal Flex Clamp Probe Accessory 10 in (25cm)

The FLIR TA72 adds capabilities, simplifies challenges, and gives the best readings with your existing meter. Made with a narrow, 10-inch long flexible coil clamp and locking mechanism, the TA72 provides maneuverability and convenience to easily take measurements in tight or awkward spots. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.

ENVIRONMENTAL & CERTIFICATIONS

• Agency Approvals - CE, UL
• Drop test - 9.8' (3m)
• Safety Rating - CAT IV 600V,CAT III 1000V
• Standards - EN61010‐1, EN61010‐2‐032
• WarrantyLimited lifetime with registration

• Probe Length - 73" (1.9m)
• Work light - Two white LEDs

• Gallery - 17541

• AC Current Bandwidth - 45Hz – 500Hz (sine wave)
• AC Current Ranges and Resolution - 30.00A, 300.0A, 3000A
• Basic AC current accuracy (full scale) - ± 3.0% + 5 digits
• Flex Coil Diameter - 0.3" (7.5mm);
• Flex Coil Length - 10" (25 cm)
• Flex Coil Tip Diameter - 0.5" (13mm)
• Max Conductor Diameter Capacity - 2.4" (6cm)
• Maximum AC current - 3000A AC
• Measurement Rate - 1.5 samples per second, nominal
• Min Reqs for Meter Comp with TA72 - AC voltage function 4000 count display 1mV resolution
• Positional Error [distance from optimum] - 1.4" (35mm) 1.0% / 2.0" (50mm) 1.5% / 2.4" (60mm) 2.0%

• Power Supply - (2) 1.5V "AAA"