The
FLIR CM46 clamp meter is designed for commercial and residential electricians. Featuring both AC/DC measurement, the meter is equipped with a bright backlit display for use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately — to a tenth of a digit. The meter also offers MAX/MIN/AVG recording; measures DCµA, temperature, capacitance, and frequency; and has electrical field detection to help you determine voltage presence and relative strength of the field.
MEASUREMENT & ANALYSIS
- AC Voltage (Digital Low Pass Filter-VFD) - 600 V (Basic Accuracy ±1.0%)
- AC/DC Voltage (Digital Low Pass Filter - VFD) - 600 V (Basic Accuracy ±1.2%)
- Accu-Tip Clamp-On AC Current - 60 A (Basic Accuracy ±1.5%)
- Accu-Tip Clamp-On DC Current - 60 A (Basic Accuracy ±2.0%)
- Capacitance - 2500 µF (Basic Accuracy ±2.0%)
- Category - CAT IV 300V / CAT III 600V
- Clamp-On AC Current (100-400 Hz) - 400 A (Basic Accuracy ±2.0%)
- Clamp-On AC Current (50-100 Hz) - 400 A (Basic Accuracy ±1.8%)
- Clamp-On DC Current - 400 A (Basic Accuracy ±2.0%)
- Continuity - 10Ω< & < 250Ω
- DC microA - 2000 µA (Basic Accuracy ±1.0%)
- DC Voltage - 600 V (Basic Accuracy ±1.0%)
- Diode - 2.0 V (Basic Accuracy ±1.5%)
- Frequency - 50-400 Hz (Basic Accuracy ±1.0%)
- NCV - Yes
- Recording - Min / Max / Avg
- Resistance - 60 kΩ (Basic Accuracy ±1.0%)
- Temperature -40°C to 400°C (-40°F to 752°F) (Basic Accuracy ±1.0%)
USER INTERFACE
- Display - 3-5/6 digits 6000 counts
POWER
GENERAL
- Backlight LCD - Yes
- Jaw Opening - 30 mm Max
ENVIRONMENTAL & CERTIFICATIONS
- Certifications - UL , CE
- Drop test - 2m
- Operating Temperature -10°C to 50°C (14 to 122°F)
- WarrantyLimited 3-Year
